Monaural Class A Reference Amplifier
Since July 1998, Electrocompaniet have collaborated on a studio monitoring project with a famous and respected London recording complex neighboring the worlds most famous zebra-crossing.
Powering B&W Nautilus 801 studio monitor speakers, we could not resist to name our new monoblock, Nemo.
The Electrocompaniet Nemo was developed to sufficiently drive and control the B&W Nautilus 801, which demands a very high voltage swing and current capability. The Electrocompaniet Nemo is a power amplifier capable of delivering more than 600 watts of undistorted power into any load for maximum fidelity reference monitoring purposes.
Electrocompaniet’s products are renowned for uncompromising sonic qualities. Our cutting edge balanced system technology is implemented in the design of the Nemo.
The Electrocompaniet Nemo is based on the acclaimed AW 180 M monoblock power amplifier, operating in a balanced/bridged configuration, where both halves of the bridge are fully balanced. By such a design, we achieve "double" cancellations that reduce harmonic distortion and noise to a minimum.
Distortion will normally increase dramatically in all ordinary bridged power amplifier designs.
But due to our unique balanced system design – distortion is largely reduced – even when the power output is increased by 3,8 times compared to a single ended designed power amplifier.
For maximum reproduction quality, the power supply in each Nemo is totally separated for each half of the bridge.
|
Technical Specification
|
- Amplifier Section
- Input Impedance (Fixed) : 55 kW
- Output Impedance (20 Hz-20kHz) : < 0,009 W
- Frequency response (DC - 65 kHz) : - 0.4 dB
- Input level for rated output : 1 V RMS
- Max. peak current : > 150 A
- THD (measured at 1 kHzhalf power,8W) : < 0,001 %
- THD (measured at 1 kHz -1 dB, 8 W) : < 0,0015 %
- Noise (measured with bothinputsshorted) :
- 400 Hz - 30 kHz : 150 µV
- DC - 30 kHz : 200 µV
- Damping factor (20 Hz - 20 kHz) : > 900x
- Rated output power
- Power consumption (no load or signal) : 230 W
- The NEMO is DC coupled from input to output
- Dimensions
- Width : 514 mm / 20.2 inches
- Depth : 470 mm / 18.5 inches
- Height : 288 mm / 11.3 inches
- Weight : 41 kg. / 90.2 lbs.